elins@elins.lt
+370 5 2779416
en
Home
About Us
News
Our partners
Products
Nuclear Medicine
Radiopharmacy
Hot laboratory
Personal radiation protection
Industry
Electromagnetic testing
Magnetic particle inspection
Dye penetrant testing
Radiographic testing
Computer radiography
Quality tools
Chemicals
X-Ray films
KODAK INDUSTREX Get the T-Grain Emulsion Advantages KODAK INDUSTREX Films with T-GRAIN Emulsion off er a brand new, state-of-the-art technology that’s specifi cally designed for industrial radiographic testing applications. What does that mean for you? Outstanding Image Quality With a cool, clean image tone and low noise, you get a sharp, clear image every time. Convenient Processing Flexibility The fi lms work well in standard process cycles—but they’re just as eff ective in longer or shorter process cycles. Superb Durability The fi lms are static resistant, more heat resistant than conventional systems, incredibly sturdy, and you’ll get fewer artifacts from handling.
Film processors
Note that when ordering processor, customer must prepare it for installation. Technical personal of elins will assemble the processor after that. Electrical requirements: Current: 20A Grounding. Power fuses: – On the wall near processor – Easy accessible from the processor – Viewable from the processor – Not less than 2 m from the processor Power: Voltage: 220 V Frequency: 50/60 Hz Power: 3300 W 1-phase, 2-cables and ground Water: – water-supply must be near the processor and accessible. Temperature: 15 – 25 C Pressure: 138 – 448 kPa Flow: controlled by machine between 2,8 +/- 0,2 L/min Filtering: 50 microns filter Drain: – Drain must be made of chemical resistance, rustproof material – Minimum diameter 7,6 cm – Drain must be not less than 1,5 m distance from processor – Drain must be downhilled Capacity: 3 l/min – normal operation 43,5 l/min – draining all three solutions at once 14,4 l/min – draining every solution separately Environmental requirements: Temperature: 15 – 30 C Humidity: 15 – 76 % Ventilation: 2,124 l/min (max. 66 C) Processor ventilation connector: 7,6 cm Heating: 3400 kJ/h During installation, the presence of plumber of the client is required. During start-up the client must have Developer…
Mobile X-ray systems
Portable X-Ray generators
Ultrasound testing
Thickness/Corrosion gauges
Flaw detectors
Visual Testing
Eddy Current Testing
Contact Us
CONTACT US
Home
About Us
News
Our partners
Products
Nuclear Medicine
Radiopharmacy
Hot laboratory
Personal radiation protection
Industry
Electromagnetic testing
Magnetic particle inspection
Dye penetrant testing
Radiographic testing
Computer radiography
Quality tools
Chemicals
X-Ray films
KODAK INDUSTREX Get the T-Grain Emulsion Advantages KODAK INDUSTREX Films with T-GRAIN Emulsion off er a brand new, state-of-the-art technology that’s specifi cally designed for industrial radiographic testing applications. What does that mean for you? Outstanding Image Quality With a cool, clean image tone and low noise, you get a sharp, clear image every time. Convenient Processing Flexibility The fi lms work well in standard process cycles—but they’re just as eff ective in longer or shorter process cycles. Superb Durability The fi lms are static resistant, more heat resistant than conventional systems, incredibly sturdy, and you’ll get fewer artifacts from handling.
Film processors
Note that when ordering processor, customer must prepare it for installation. Technical personal of elins will assemble the processor after that. Electrical requirements: Current: 20A Grounding. Power fuses: – On the wall near processor – Easy accessible from the processor – Viewable from the processor – Not less than 2 m from the processor Power: Voltage: 220 V Frequency: 50/60 Hz Power: 3300 W 1-phase, 2-cables and ground Water: – water-supply must be near the processor and accessible. Temperature: 15 – 25 C Pressure: 138 – 448 kPa Flow: controlled by machine between 2,8 +/- 0,2 L/min Filtering: 50 microns filter Drain: – Drain must be made of chemical resistance, rustproof material – Minimum diameter 7,6 cm – Drain must be not less than 1,5 m distance from processor – Drain must be downhilled Capacity: 3 l/min – normal operation 43,5 l/min – draining all three solutions at once 14,4 l/min – draining every solution separately Environmental requirements: Temperature: 15 – 30 C Humidity: 15 – 76 % Ventilation: 2,124 l/min (max. 66 C) Processor ventilation connector: 7,6 cm Heating: 3400 kJ/h During installation, the presence of plumber of the client is required. During start-up the client must have Developer…
Mobile X-ray systems
Portable X-Ray generators
Ultrasound testing
Thickness/Corrosion gauges
Flaw detectors
Visual Testing
Eddy Current Testing
Contact Us
en
en
Home
About Us
News
Our partners
Products
Nuclear Medicine
Radiopharmacy
Hot laboratory
Personal radiation protection
Industry
Electromagnetic testing
Magnetic particle inspection
Dye penetrant testing
Radiographic testing
Computer radiography
Quality tools
Chemicals
X-Ray films
KODAK INDUSTREX Get the T-Grain Emulsion Advantages KODAK INDUSTREX Films with T-GRAIN Emulsion off er a brand new, state-of-the-art technology that’s specifi cally designed for industrial radiographic testing applications. What does that mean for you? Outstanding Image Quality With a cool, clean image tone and low noise, you get a sharp, clear image every time. Convenient Processing Flexibility The fi lms work well in standard process cycles—but they’re just as eff ective in longer or shorter process cycles. Superb Durability The fi lms are static resistant, more heat resistant than conventional systems, incredibly sturdy, and you’ll get fewer artifacts from handling.
Film processors
Note that when ordering processor, customer must prepare it for installation. Technical personal of elins will assemble the processor after that. Electrical requirements: Current: 20A Grounding. Power fuses: – On the wall near processor – Easy accessible from the processor – Viewable from the processor – Not less than 2 m from the processor Power: Voltage: 220 V Frequency: 50/60 Hz Power: 3300 W 1-phase, 2-cables and ground Water: – water-supply must be near the processor and accessible. Temperature: 15 – 25 C Pressure: 138 – 448 kPa Flow: controlled by machine between 2,8 +/- 0,2 L/min Filtering: 50 microns filter Drain: – Drain must be made of chemical resistance, rustproof material – Minimum diameter 7,6 cm – Drain must be not less than 1,5 m distance from processor – Drain must be downhilled Capacity: 3 l/min – normal operation 43,5 l/min – draining all three solutions at once 14,4 l/min – draining every solution separately Environmental requirements: Temperature: 15 – 30 C Humidity: 15 – 76 % Ventilation: 2,124 l/min (max. 66 C) Processor ventilation connector: 7,6 cm Heating: 3400 kJ/h During installation, the presence of plumber of the client is required. During start-up the client must have Developer…
Mobile X-ray systems
Portable X-Ray generators
Ultrasound testing
Thickness/Corrosion gauges
Flaw detectors
Visual Testing
Eddy Current Testing
Contact Us
Visual Testing
Home
Products
Visual Testing
Visual Testing
Visual testing kits, Mirrors.
February 27, 2019
Home
About Us
News
Our partners
Products
Nuclear Medicine
Radiopharmacy
Hot laboratory
Personal radiation protection
Industry
Electromagnetic testing
Magnetic particle inspection
Dye penetrant testing
Radiographic testing
Computer radiography
Quality tools
Chemicals
X-Ray films
Film processors
Mobile X-ray systems
Portable X-Ray generators
Ultrasound testing
Thickness/Corrosion gauges
Flaw detectors
Visual Testing
Eddy Current Testing
Contact Us
Switch The Language
Lietuviškai
English
Русский
x
