INDUSTREX M43IC Processor
Design
ed for the needs of high-volume Non-Destructive Testing customers, the INDUSTREX M43ic provides multiple processing cycles and dry-to-dry processing in as little as five minutes.
PRODUCT SPECIFICATIONS
| Unit Description | Floor-standing, high capacity general NDT radiography |
| Film format types | Cut sheet and adaptable for roll lengths |
| Recommended development time & temperature | 100 sec development time (39cm/min) @ 26°C |
| Film sheets processing capacity/hour (35×43 cm) | 58 sheets/hr @ 100 sec recommended development time |
| Film thickness | 0.10 mm–0.18 mm |
| Material length (minimum) | 10 cm minimum |
| Material width | 7.0 cm–43.0 cm Note: For multi-loading of narrow width films, feed tray loading guides are required for film widths 70mm-100mm and are available from the OEM as an accessory |
| Cycle time (dry to dry) (min) | 2.1–12.6 min (8 min @ 100 sec recommended development time) |
| Replenisher tanks | 2×50 liter/dust cover lids and floating lid for developer tank |
| Solution Heating (developer and fixer) | Adjustable in a range of 18°C–43°C (separate in-line 350W heaters) |
| Developer tank size | 13.4 L (including developer filter system) |
| Fixer tank size | 13.3 L |
| Wash Water tank size | 11.5 L |
| Wash water reduction system | Water used only on demand. 2.5 L/min during process cycle |
| Dryer range | Adjustable in a range 18°C–60°C |
| Dryer type | Warm air |
| Number of programming channels available | 9 Channels (Channel 1 is pre programmed with standard process cycle recommendations) |
| Automatic cleaning cycle | Yes |
| Power requirements | 230VAC +/-10%, 50-60hz single Phase, 16A, 3.6KW |
| Processor stand | N/A |
| Weight | Empty: 177 kg, with solution: 215 kg |